Makita Hr4500c: Pros And Cons, Common Issues, And Best Places To Purchase

Makita HR4500C Information

The Makita HR4500C is a powerful and versatile SDS-Max rotary hammer drill that is ideal for a wide range of demolition and construction applications. It features a powerful 1,300-watt motor that delivers up to 8.3 joules of impact energy, making it capable of breaking through even the toughest concrete and masonry. The HR4500C also features a variable speed dial and electronic speed control for precise control over the drilling and hammering speed, as well as a reduced vibration design for less operator fatigue.

Here is an overview of the Makita HR4500C's specifications:

• Motor: 1,300 watts
• Impact energy: 8.3 joules
• Blows per minute: 1,250-2,550
• No load speed: 120-240 RPM
• Chuck type: SDS-Max
• Max concrete drilling capacity: 45mm
• Max masonry drilling capacity: 45mm
• Max steel drilling capacity: 13mm
• Weight: 7.8kg

Here are some of the key features of the Makita HR4500C:

• Powerful 1,300-watt motor delivers up to 8.3 joules of impact energy
• Variable speed dial and electronic speed control for precise control over the drilling and hammering speed
• Reduced vibration design for less operator fatigue
• Two operation modes: rotation with hammering and hammering only
• Dust sealed switch and bearings for extended life
• Long lasting carbon brushes
• Service reminder light indicates when carbon brushes need replacement or switch / cord needs service
• Ergonomic soft grip handle for comfortable operation
• Sturdy carrying case for easy transport and storage

What's in the box:

• Makita HR4500C rotary hammer drill
• SDS-Max chuck adapter
• 35mm SDS-Max pilot bit
• 19mm SDS-Max chisel
• Hex wrench
• Carrying case

The Makita HR4500C is a powerful and versatile SDS-Max rotary hammer drill that is ideal for a wide range of demolition and construction applications. It features a powerful motor, variable speed control, and reduced vibration design for a comfortable and efficient user experience. If you are looking for a high-performance rotary hammer drill, the Makita HR4500C is a great option.

Makita HR4500C Compare with Similar Item

a table comparison of the Makita HR4500C with some similar items:

Feature	Makita HR4500C	DeWalt D25001	Bosch GBH 8-45 DV
Power	1,500 watts	1,500 watts	1,500 watts
Hammer force	110 joules	105 joules	100 joules
Rated speed	0-3,000 rpm	0-3,000 rpm	0-3,000 rpm
Weight	13.8 kg	13.6 kg	13.8 kg
Price	$399	$379	$399

As you can see, the Makita HR4500C is very similar to the DeWalt D25001 and Bosch GBH 8-45 DV. All three drills have the same power, hammer force, and rated speed. They also have similar weights and prices.

The main difference between the three drills is the vibration control system. The Makita HR4500C has a more advanced vibration control system than the other two drills. This means that it produces less vibration, which can help to reduce fatigue and improve accuracy.

If you are looking for a powerful and versatile hammer drill, any of these three drills would be a good choice. However, if you are concerned about vibration, the Makita HR4500C is the best option.

Here are some additional details about each drill:

• The Makita HR4500C has a built-in dust blower to help keep the work area clean. It also has a variable speed trigger and a reversible chuck.
• The DeWalt D25001 has a belt hook for easy carrying. It also has a built-in LED work light.
• The Bosch GBH 8-45 DV has a soft grip handle for added comfort. It also has a quick-release chuck for easy bit changes.

Ultimately, the best drill for you will depend on your individual needs and preferences. If you have any further questions, please let me know.

Makita HR4500C Where To Buy

Here are some places where you can buy the Makita HR4500C and spare parts:

• Makita Direct: This is the official Makita website, so you can be sure that you are getting genuine parts. They also offer a wide variety of spare parts, so you should be able to find what you need.
• Walmart: Walmart is a major retailer that usually has a good selection of power tools and spare parts. You may be able to find the Makita HR4500C at your local Walmart, or you can order it online.
• Amazon: Amazon is another major retailer that sells a wide variety of products, including power tools and spare parts. You may be able to find the Makita HR4500C for a lower price on Amazon than at other retailers.
• Best Buy: Best Buy is a major electronics retailer that also sells power tools and spare parts. You may be able to find the Makita HR4500C at your local Best Buy, or you can order it online.
• Lowes: Lowes is a major home improvement retailer that also sells power tools and spare parts. You may be able to find the Makita HR4500C at your local Lowes, or you can order it online.
• eBay: eBay is an online auction site where you can find a variety of power tools and spare parts, including the Makita HR4500C. You may be able to find a good deal on the Makita HR4500C on eBay, but be sure to do your research before you buy to make sure that you are getting a genuine part.

Please note that the availability of the Makita HR4500C and spare parts may vary depending on the retailer. It is always a good idea to check the retailer's website before you make a purchase.

Makita HR4500C Problems and Solutions

some common issues and problems with the Makita HR4500C and their solutions:

• The hammer drill won't start. This is usually caused by a problem with the power switch. To fix it, you will need to disassemble the drill and inspect the power switch. If the switch is damaged, you will need to replace it.
• The hammer drill won't hammer. This is usually caused by a problem with the hammer mechanism. To fix it, you will need to disassemble the drill and inspect the hammer mechanism. If the mechanism is damaged, you will need to replace it.
• The hammer drill is making a strange noise. This could be caused by a number of problems, such as a loose bearing, a damaged gear, or a broken piston. To diagnose the problem, you will need to disassemble the drill and inspect the internal components. Once you have identified the problem, you can then replace the damaged part.
• The hammer drill is overheating. This is usually caused by prolonged use at high speeds. To prevent the drill from overheating, you should take breaks every few minutes to let it cool down. You should also avoid using the drill at high speeds for extended periods of time.
• The hammer drill is smoking. This is a serious problem and should not be ignored. Smoking can be caused by a number of problems, such as a short circuit, a bearing failure, or a fire. If your drill is smoking, you should immediately stop using it and unplug it from the power outlet. You should also contact a qualified technician to have the drill repaired.

Here are some additional tips to help you keep your Makita HR4500C in good working condition:

• Use the correct drill bit for the job. Using the wrong drill bit can damage the drill and the workpiece.
• Don't overload the drill. If you overload the drill, it can overheat and damage the motor.
• Keep the drill clean and lubricated. This will help to prevent wear and tear on the internal components.
• Store the drill in a cool, dry place. This will help to prolong the life of the drill.

By following these tips, you can help to ensure that your Makita HR4500C hammer drill provides you with years of reliable service.

Makita HR4500C Manual

Makita HR4500C Rotary Hammer

Safety Information

• Read all safety warnings and instructions before using this product.
• Keep this manual for future reference.
• Do not use this product in a hazardous environment, such as in the presence of flammable or explosive liquids or gases.
• Keep bystanders away from the work area.
• Wear safety glasses and hearing protection when operating this product.
• Wear gloves when handling sharp objects.
• Do not use this product if it is damaged or malfunctioning.
• Disconnect the power supply before servicing or making adjustments to this product.
• Do not use this product for any purpose other than its intended use.

Before Use

• Make sure that the power cord is properly connected to a properly grounded outlet.
• Select the correct bit for the job.
• Assemble the bit in the chuck according to the instructions in the manual.
• Test the bit in a scrap piece of material before using it on the workpiece.
• Start the tool slowly and increase the speed as needed.
• Apply pressure to the tool evenly.
• Do not overload the tool.
• Allow the tool to cool down after prolonged use.

Troubleshooting

• If the tool stops working, disconnect the power supply and check for a blown fuse or tripped circuit breaker.
• If the tool is overheating, allow it to cool down before using it again.
• If the tool is making strange noises, stop using it immediately and contact Makita customer service.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for signs of wear or damage.
• Replace worn or damaged parts immediately.
• Do not attempt to repair the tool yourself.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If this tool fails within the warranty period, Makita will repair or replace it, at its option, free of charge. This warranty does not cover damage caused by abuse, misuse, or neglect.

Contact Information

Makita USA, Inc.

7000 Stevens Creek Blvd.

Cupertino, CA 95014

Phone: 1-800-462-5482

Website: www.makitatools.com

Additional Information

• For more information on this product, please visit the Makita website or contact Makita customer service.
• Makita offers a variety of accessories for this product. Please visit the Makita website or contact Makita customer service for more information.
• This product is intended for professional use only.